Stainless steel filtration mesh is a functional material designed specifically for separating solid particles from liquids and gases. The material, mesh count, wire diameter, weave pattern, and support structure together determine retention, flow rate, pressure drop, and cleanability. It's widely used in hydraulic oil filtration, fuel filtration, water treatment, chemical processing, pharmaceutical manufacturing, food and beverage production, and air or gas filtration applications.
Stainless steel filtration mesh can be sold as roll material, or fabricated into filter discs, cartridges, filter baskets, and composite filter elements. CHG Metal offers materials including 304, 316, and 316L, covering plain weave, twill weave, and Dutch weave, and we also accept custom requests. You can start by defining your target micron rating based on the liquid and particles, then choose the weave pattern and structure - and we'll put together a custom solution for you.
Mesh Count vs Filtration Rating
| Mesh Count | Wire Diameter (mm) | Opening Size (mm) | Approx. Filtration (µm) |
|---|---|---|---|
| 40 Mesh | 0.21 | 0.42 | 350–400 |
| 60 Mesh | 0.16 | 0.26 | 250–300 |
| 80 Mesh | 0.14 | 0.17 | 180–200 |
| 100 Mesh | 0.10 | 0.15 | 130–150 |
| 150 Mesh | 0.065 | 0.10 | 80–100 |
| 200 Mesh | 0.053 | 0.07 | 60–70 |
| 300 Mesh | 0.035 | 0.05 | 25–40 |
Weave Type Comparison
| Weave Type | Structural Feature | Filtration Precision | Typical Application |
|---|---|---|---|
| Plain Weave | Balanced structure | Medium | General filtration |
| Twill Weave | Dense and stable | High | Fine filtration |
| Dutch Weave | High density warp | Very High | Precision filtration |
Industry Application Guide
| Industry | Recommended Mesh | Material Grade | Key Benefit |
|---|---|---|---|
| Hydraulic Oil | 100–200 Mesh | 316L | High pressure resistance |
| Fuel Filtration | 120–250 Mesh | 316L | Stable micron control |
| Water Treatment | 80–150 Mesh | 304 / 316 | Cost-effective |
| Chemical Processing | 150–300 Mesh | 316L / 904L | Corrosion resistance |
| Food & Beverage | 80–200 Mesh | 304 / 316L Food Grade | Hygienic & reusable |


Filtration Mesh Inspection
Checks cover alloy, mesh or aperture, wire, weave, width, surface and cleanliness. Elements add connection, support, seal and pressure drop.
Certificates, bubble-point, flow and particle-challenge testing can be specified.
FAQ
Q: Is a higher mesh count always finer?
A: Usually the opening decreases, but wire diameter and weave change the rating. Use the measured micron target.
Q: Which alloy is best for chemical liquids?
A: 316/316L is common, but concentration, chloride, temperature and cleaning determine whether a higher alloy is needed.
Q: Can you supply mesh and finished elements?
A: Yes. Rolls, sheets, discs, cartridges and baskets are available.
Request a Quote
Send the medium, micron target, flow, pressure drop, temperature, alloy, dimensions and element form to CHG Metal for a filtration quotation.






