Twill weave stainless steel wire mesh has weft wires crossing over two warp wires, interlacing in a twill pattern that gives the mesh surface a diagonal texture. Compared with plain weave, twill weave more easily maintains structural stability under high mesh counts, fine wire diameters, and fine apertures, and is commonly used in fine filtration, screening, printing, batteries, and precision components. It's also favored in the architectural and decorative industries for its more attractive appearance.
CHG Metal can supply high-mesh-count twill weave mesh such as 250–500 mesh, in materials including 316 and 316L, and can cut, stamp, roll, and frame it. When purchasing, please provide the mesh count, wire diameter, aperture, width, and application first, so we can give you a prompt and accurate custom solution or quote.

Twill Weave Stainless Steel Wire Mesh Technical Parameters:
- Materials: A selection of stainless steel grades such as 302, 304, 304L, 310, 316, 316L, 321, 410, 410L, along with super duplex stainless steel, duplex stainless steel, and the option for custom materials.
- Hole Patterns: The mesh is available with either square or rectangular hole configurations to suit various needs.
- Surface Treatment: The wire mesh undergoes processes like pickling and passivation for corrosion resistance, as well as polishing for a smooth finish.
- Rolls: Each roll is meticulously wrapped in craft paper and then packed into a carton or placed on a pallet for protection during shipment.
- Sheets: Sheets of wire mesh are securely packed in wooden boxes or arranged on pallets to ensure they remain undamaged during transportation.
|
Items |
Mesh |
Wire Diameter (mm) |
Aperture (mm) |
Material (AISI) |
|
SSTW01 |
250 × 250 |
0.040 |
0.063 |
SUS316 |
|
SSTW02 |
300 × 300 |
0.040 |
0.044 |
|
|
SSTW03 |
325 × 325 |
0.035 |
0.043 |
SUS316L |
|
SSTW04 |
350 × 350 |
0.030 |
0.042 |
|
|
SSTW05 |
400 × 400 |
0.030 |
0.033 |
|
|
SSTW06 |
450 × 450 |
0.028 |
0.028 |
|
|
SSTW07 |
500 × 500 |
0.025 |
0.026 |
Twill vs Plain Weave
Plain weave alternates one over one and provides regular square openings and high flow. Twill passes over two wires, giving a denser, more stable structure at high counts.
The two weaves are not interchangeable at the same mesh count. Aperture, open area, flow and pressure drop should be rechecked.
Cutting and Installation
The twill direction can affect appearance, cutting yield and mechanical behaviour. Mark the direction on drawings for discs and panels.
Fine twill mesh is easily creased. Use interleaving, controlled winding and suitable frames during installation.
A twill weave filter mesh or 200 mesh twill weave mesh should be selected against the target aperture and pressure drop. When comparing twill vs plain weave, use the measured opening and open area rather than the mesh count alone.
Twill Mesh Inspection
Checks cover mesh, wire, aperture, twill direction, surface, broken wires, width and length. Fabricated parts add cutting direction, burr, weld and tension.
Certificates, aperture checks and third-party inspection can be specified.
FAQ
Q: Is twill weave stronger than plain weave?
A: It is generally more stable at fine wire and high mesh counts, but strength also depends on wire, alloy and support.
Q: What aperture does 250 mesh twill have?
A: The original reference is about 0.063 mm, but the actual value depends on wire and manufacturing tolerance.
Q: Can you cut in a specified direction?
A: Yes. Mark the twill direction and orientation on the drawing.
Request a Quote
Send the twill mesh count, wire diameter, aperture, alloy, dimensions, cutting direction and quantity to CHG Metal for a quotation.









