A stainless steel filter element is an assembly, not just a piece of mesh. It combines the filtration layer, support layer, drainage layer, frame, end connection and seal. The filter layer sets retention; the support carries pressure; the drainage path affects flow and cleaning; the connection determines whether the element fits the equipment.
CHG Metal manufactures filter discs, cylinders, pleated cartridges, baskets and custom assemblies in 304, 316 and 316L.
Filter Element Form & Application
| Element Form | Typical Filtration Rating | Material | Common Application |
|---|---|---|---|
| Disc | 5–150 µm | 304 / 316 | Hydraulic oil, fuel |
| Cylinder | 10–200 µm | 316 / 316L | Water, chemical liquids |
| Pleated Cartridge | 5–100 µm | 304 / 316 | High flow filtration |
| Basket Filter | 50–500 µm | 304 / 316 | Pipeline protection |
Weave Type Comparison
| Weave Type | Structure Feature | Filtration Accuracy | Typical Use |
|---|---|---|---|
| Plain Weave | Simple over-under | Medium | General filtration |
| Twill Weave | Tighter weave | High | Fine filtration |
| Dutch Weave | Warp & weft unequal | Very High | Precision / high-pressure filtration |
| Sintered Mesh | Multi-layer bonded | Very High | High-pressure / fine particle filtration |
Recommended Material & Industry Use
| Industry | Recommended Material | Recommended Filtration Rating | Notes |
|---|---|---|---|
| Hydraulic Systems | 316L | 5–150 µm | High pressure & oil resistant |
| Fuel Filtration | 316L | 10–200 µm | Chemical compatibility |
| Water Treatment | 304 / 316 | 50–200 µm | Corrosion resistant |
| Chemical Processing | 316 / 904L | 1–100 µm | Strong chemical resistance |
| Food & Beverage | 304 / 316L Food Grade | 50–200 µm | Hygienic & reusable |


Layers, Seals and Bypass Control
Multi-layer elements must bond the filter, support, drainage and protection layers without edge bypass. Cylinders and cartridges also need end caps, seals and a support core that match the housing.
The connection is often the reason an element will not fit or seal. Supply the housing drawing, interface photo, seal dimensions and flow direction, or a physical sample.
FAQ
Q: Can filter elements be made from equipment drawings?
A: Yes. Provide the interface, installation space, medium, rating and flow.
Q: How is edge bypass controlled?
A: Through the specified edge bond, support and seal design. The exact method depends on the element drawing and duty.
Q: Should I choose a disc or a cartridge?
A: It depends on housing space, filtration area, flow and cleaning. Rating alone is not enough.
Request a Quote
Send the equipment drawing, interface, medium, rating, flow, pressure drop, temperature, alloy and cleaning method to CHG Metal for a filter element quotation.






