CHG manufactures high-flow Dutch Weave filter leaves specifically for pressure leaf filter systems.
The design combines coarse, high-strength warp wires with tightly packed fine weft wires to form a highly precise wedge-shaped 3D pore matrix. This structure effectively retains abrasive pre-coat clay or catalyst particles while maintaining a wide enough open area to minimize internal hydraulic resistance.
It not only delivers excellent mechanical strength - handling pressure differentials up to 5.0 bar - but also provides an ultra-smooth surface that ensures automatic dry cake release with no wire snagging or fiber tearing.

Dutch Weave Structure
The filtration medium used in the High-Flow Dutch Weave Filter Leaf is formed by tightly interweaving coarser warp wires and finer weft wires to create a stable wedge-shaped aperture structure. Compared with plain square mesh, it is suited to filter leaf applications that require a balance between aperture, mechanical stability, and flow.
To get your filtration speed dialed in, pick the exact mesh architecture that matches your process viscosity:
| Mesh Count Specification | Nominal Rating (μm) | Warp Wire Diameter | Weft Wire Diameter | Primary Process Target |
| 24 x 110 Mesh | 70 - 80 μm | 0.35mm | 0.25mm | Edible oil bleaching, crude sugar syrup, winterization |
| 30 x 150 Mesh | 45 - 55 μm | 0.25mm | 0.18mm | Fine chemical separation, light catalyst recovery |
| 80 x 700 Mesh | 15 - 20 μm | 0.10mm | 0.07mm | High-purity pharmaceutical fractionation, sub-micron solids |
Aperture Matrix
Aperture specs are designed around your target particles, allowable bypass, cake formation method, pre-coating, and flow rate. Or you can just send us your required micron rating, mesh count, or pre-cut panel dimensions - CHG specializes in custom manufacturing to match your filtration requirements exactly.
Flow and Pressure Drop
Flow and pressure drop are affected by mesh opening, wire diameter, open area, medium viscosity, solids content, precoat, and filter cake thickness.
Replacement Compatibility

Full leaf replacements can be built to match your original leaf dimensions, frame, outlet, and mounting structure.
If you only need the mesh replaced, just send us your Dutch Weave filter mesh specs, cut dimensions, edge fastening method, and existing support structure - and we'll put together a solution for you.
FAQ
How do I choose the Dutch Weave specification?
+
-
Select the Dutch Weave specification for the filter leaf based on the target filtration rating, medium viscosity, flow, allowable pressure drop, precoat, and cleaning method, together with wire diameter, weave combination, and open area.
Can Dutch Weave mesh be used for replacement leaves?
+
-
Mesh or complete-leaf replacements can be manufactured from drawings, samples and dimensions, with edge fixing, tension and sealing designed to match the equipment connection.
Does a finer aperture always give better filtration?
+
-
A finer aperture may improve retention, but it may also increase pressure drop and blockage risk. It must be evaluated together with flow and cleaning method.
What information is needed for a quotation?
+
-
Please provide aperture or mesh count, wire diameter, material, dimensions, edge type, medium, pressure, temperature, cleaning method, quantity, and equipment drawings.
Related Products and CTA
Please provide aperture, mesh count, material, dimensions, equipment connections, and operating conditions so the Dutch Weave filter leaf or replacement screen solution can be confirmed.
Related Products: Multi-Layer Filter Leaf; Sintered Mesh Filter Leaves; Corrosion-Resistant Filter Leaves
Simply send us your required micron rating, mesh count, or pre-cut panel dimensions-we specialize in fully customized manufacturing to perfectly match your filtration requirements.
Our address
Room 1310-5, Block A, Zhongliang Plaza, No. 345 Youyi North Street, Lianmeng Road, Xinhua District, Shijiazhuang City, Hebei Province, China 050061
Phone Number
+8615076820259
jesse@chgmetal.com







