Horizontal Leaf Filter Elements

Horizontal Leaf Filter Elements

Product Name: Horizontal Leaf Filter Elements
Product Type: Circular, rectangular or custom leaf elements for horizontal pressure leaf filters
Core Construction: Central shaft/hub, frame, mesh layers, drainage core, carrier rail and outlet connection
Size Capability: Leaf width or diameter up to about 2000 mm; height up to about 2200 mm
Mesh Range: 15–150 µm reference; outer wire diameter 0.14–0.40 mm; internal drainage mesh 1.5–2.5 mm
Materials: SS304, SS316L, SS321, Alloy 20, Hastelloy C276 and other alloys
Discharge Options: Wet sluice discharge, reslurrying or dry vibration cake discharge
Send Inquiry
Description
Technical Parameters

 

CHG Metal manufactures horizontal leaf filter elements for horizontal pressure leaf filter vessels. The element is mounted on a central manifold shaft, bottom header or carrier rail system and is designed to match the vessel shell profile, leaf spacing and cake discharge method. Standard elements can be supplied in circular, rectangular or custom profiles with stainless steel mesh layers, reinforced frames, machined hubs and sealing connections.

 

horizontal leaf filter for edible oil  horizontal leaf filter manufacturer

 

Horizontal Layout and Working Principle

 

A horizontal pressure leaf filter normally consists of a horizontal pressure vessel, a central filtrate manifold, support rails and a set of parallel filter leaves. Slurry enters the vessel and passes through both faces of each leaf.

 

Solids form a cake on the outer mesh, while clean filtrate flows through the drainage layer into the central manifold or bottom collection header. The leaf array is removed or retracted as a bundle for inspection and maintenance.

 

Structure

Function

Page Focus

Horizontal pressure vessel

Contains slurry and the leaf set

Explained only as the installation environment, not as a complete equipment page

Central shaft/manifold

Collects filtrate and connects to the outlet

Hub, sleeve, sealing and leaf spacing

Support rails/carrier

Maintains leaf alignment and removal position

Rail size, center distance and withdrawal clearance

Leaf frame

Carries differential pressure, cake load and vibration

C-channel, U-channel or reinforced rectangular frame

Filtration mesh

Retains particles and builds the filter cake

PDW/TDW, mesh count, wire diameter and target micron

Drainage core

Directs filtrate to the manifold

3×3, 4×4 or high-flow drainage construction

 

Central Shaft and Hub

 

The central hub and shaft connection determine whether the leaf array fits the vessel and whether filtrate can flow without bypass.

 

CHG Metal machines hubs, spigots, flanges, keyways and seal grooves according to the existing shaft drawing or a measured sample.

 

O-rings, compression seals or flat gaskets are selected for the process fluid and temperature.The hub position and leaf spacing are checked across the full set so that adjacent leaves do not touch during installation, vibration or thermal expansion.

 

Shell-Fit Dimensions

 

Horizontal leaf dimensions are not limited to overall width and length. The outer profile must match the vessel inside diameter and support rails; the leaf spacing must allow even cake formation; and the removal path must allow the bundle to be retracted without damaging the mesh. CHG Metal reviews shell diameter, rail position, hub center, leaf spacing, panel thickness and service clearance before preparing the manufacturing drawing.

 

Discharge Options

 

Discharge Method

Working Principle

Requirements for the Leaf

Dry vibration discharge

Compressed air or gas dries the cake, then vibration releases it

Rigid frame, high mesh tension and stable hub or suspension connection

Wet sluice discharge

Water or process liquid washes and reslurries the cake for bottom discharge

Good washability, stable edge sealing and open internal drainage

Reslurry discharge

The cake is dispersed back into liquid before discharge

Easy-to-clean leaf face and frame with low residue retention

Manual or assisted cleaning

The leaf set is removed for cleaning during shutdown

Removal clearance, lifting points, edge protection and surface finish

 

Materials, Mesh and Technical Specifications

 

Item

Reference Specification

Filtration area

2–200 m² system reference

Leaf dimensions

Width/diameter up to about 2000 mm; height up to about 2200 mm

Mesh range

15–150 µm reference

Outer wire diameter

0.14–0.40 mm

Internal drainage mesh

1.5–2.5 mm

Layer count

5-layer reference; adjusted to the duty

Materials

SS304, SS316L, SS321, Alloy 20, Hastelloy C276 and other alloys

Design reference pressure

-1 to 6 bar(g)

Design reference temperature

0–150°C

Sealing

O-ring, flat gasket or compression seal

 

 

Replacement Compatibility

 

Horizontal leaf filter replacement is confirmed from the vessel drawing, original leaf drawing, retired sample or measured dimensions. The most important data are shell internal diameter, hub bore and shaft diameter, leaf center-to-center spacing, frame thickness, outlet spigot, manifold profile, seal groove and cake discharge method. CHG Metal can review elements used in direct replacement or maintenance projects.

 

FAQ

 

Q: What is a horizontal leaf filter element?

A: It is a filter leaf installed inside a horizontal pressure leaf filter. The element is supported by a central shaft, hub or carrier rail and filters through both faces of the mesh pack.

Q: Can these elements be customized for existing horizontal vessel brands?

A: Yes. We custom-manufacture replacement elements to fit all major international horizontal pressure leaf filter brands (including Amafilter, Sharplex, Mahle, and Sparkler), matching exact center-to-center spacing, hub dimensions, and manifold sealing profiles.

Q: Can the leaves be used for dry and wet cake discharge?

A: Yes. The frame, mesh tension and drainage design can be configured for dry vibration discharge or wet sluice/reslurry discharge when the vessel interface matches.

Q: Can you manufacture a horizontal leaf filter replacement without drawings?

A: Yes. We can use a retired element, measured dimensions, marked photos and the vessel connection drawing. Hub, shaft, spigot, leaf spacing and seal groove dimensions are checked before production.

Q: What information is needed for a quotation?

A: Please provide the vessel drawing or model, shell internal diameter, leaf dimensions, shaft and hub data, manifold or spigot details, seal type, mesh rating, material, pressure, temperature, medium, discharge method and quantity.

 

Request a Quote

 

Send the horizontal vessel drawing, existing leaf dimensions, hub and shaft data, discharge method and mesh requirements to CHG Metal. Our engineering team will review the shell fit, flow path, frame construction and replacement interface, then provide a production drawing and quotation.

 

Contact now

 

Hot Tags: horizontal leaf filter elements, China horizontal leaf filter elements manufacturers, suppliers

Send Message