CHG Metal manufactures high-permeability multi-layer pressure leaf filter elements for liquid filtration requiring higher flow, lower internal pressure drop and open drainage channels.
Our High-Permeability Multi-Layer Pressure Leaf Filter Elements eliminate this hidden hydraulic restriction through an engineered fluid matrix. Each panel is built using a strict, multi-tier layer sequencing. The active outer screen traps the microscopic solids, while intermediate support meshes prevent the fine outer cloth from being forced into the open drainage channels under high pressure.




Flow and Pressure Drop
A high-permeability construction is not simply a thinner mesh. It balances mesh count, support layers and drainage core to reduce internal resistance. A coarser mesh can reduce retention, while a finer mesh increases pressure drop, so the design must balance particle size, viscosity and flow.
Our engineering facility custom-manufactures these high-permeability elements to perfectly match your process fluid dynamics:
| Engineering Metric | Standard Heavy-Duty Elements | Our High-Permeability Elements |
| Internal Layer Layout | Basic 3-Layer standard stack | Engineered 5-Layer or 7-Layer Hierarchy |
| Fluid Flux Capacity | Baseline 100% | Up to 135% (Accelerated Flow Extraction) |
| △P Accumulation Profile | Linear, rapid growth | Delayed, Flat Curves (Extended Cycles) |
| Intermediate Support Layer | Single lightweight backing screen | Dual High-Flow Calendared Support Meshes |
| Drainage Channel Open Area | Approx. 45% - 50% | ≧ 68% Open-Area High-Tensile Backbone |
| Alloy Purity Standard | Standard Industrial Grade SS | Mill-Certified Low-Carbon Stainless Steel |
FAQ
Q: What is a high-permeability multi-layer filter element?
A: It is a pressure leaf element designed with open mesh and drainage construction to reduce internal pressure drop and support higher flow.
Q: Does a finer mesh always reduce flow?
A: A finer mesh usually increases pressure drop, but support layers, drainage core and flow path also affect total resistance.
Q: Can you provide flow and pressure-drop data?
A: Flow and pressure-drop data can be supplied when the test medium, viscosity, temperature, flow and element geometry are defined.
Q: What information is needed for a quotation?
A: Please provide flow, viscosity, particle size, pressure drop, medium, temperature, frame, mesh, layer construction and quantity.
Request a Quote
Send the flow, viscosity, particle size, pressure drop, medium, temperature, frame, mesh and layer construction to CHG Metal for a high-permeability leaf review.
Provide us with your current equipment brand, process fluid viscosity, design flux targets, or a sample panel-our application engineers will custom-configure a multi-layer mesh matrix calibrated to optimize your plant's specific flow metrics.
Our address
Room 1310-5, Block A, Zhongliang Plaza, No. 345 Youyi North Street, Lianmeng Road, Xinhua District, Shijiazhuang City, Hebei Province, China 050061
Phone Number
+8615076820259
jesse@chgmetal.com







